You need a parity chip. The 16MB parity chip will say 4x36 somewhere on
it. If it says 4x32, it is not parity. A good bet is to go around to a
couple of those storefront computer shops and ask them if they have any old
Compaq memory. A Compaq 16MB SIMM will work just great in a 2501. You can
also find them on Ebay for $30, $35 each.
Good luck,
Bob
----- Original Message -----
From: Ajaz Nawaz <[EMAIL PROTECTED]>
Newsgroups: groupstudy.cisco
To: <[EMAIL PROTECTED]>
Sent: Wednesday, September 13, 2000 9:24 AM
Subject: 2501 DRAM upgrade Q
> I want to upgrade the DRAM in a 2501. What type of memory do I need for
> this - what speed of 72pin SIMM do I need to buy ? parity issues ? the
> specifics please. couldn't find anything on cisco web
>
> thanks in advance
>
> **NOTE: New CCNA/CCDA List has been formed. For more information go to
> http://www.groupstudy.com/list/Associates.html
> _________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]