Just boot the router as normal. Then from exec mode type:
erase flash:
Why would you want to do that though? Then you wont have an IOS to boot
from.
What do you mean what is the register values for booting in boot prompt?
Not sure what you mean by that.
John
----- Original Message -----
From: Mail List for cisco routers <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, September 14, 2000 9:51 PM
Subject: Formatting the Flash
>
> Hi all,
> How do i format my flash in my 2600 router?Do i have to boot the
> router in boot mode? What is the regiter values for booting up the router
> in boot prompt.
>
> Thanks in advance.
>
> Regards,
> Binod.
>
> **NOTE: New CCNA/CCDA List has been formed. For more information go to
> http://www.groupstudy.com/list/Associates.html
> _________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
