Hi,
I've tried the IPSec Manual Keying example on Cisco's web site
but can't see how this can work.
http://www.cisco.com/warp/public/707/manual.html
The problem lies with the fact that the "set security-association"
option does not exist in the crypto map.
router2(config)#crypto map testcase 8 ipsec-manual
router2(config-crypto-map)#set peer 11.11.11.12
router2(config-crypto-map)#set security-association ?
% Unrecognized command
router2(config-crypto-map)#set ?
peer Allowed Encryption/Decryption peer.
session-key Security session key parameters
transform-set Specify list of transform sets in priority order
router2(config-crypto-map)#
I've tried this using 3640's and c3640-is56i-mz.120-12.bin
Your assistance would be greatly appreciated.
Regards
Oliver
Oliver Steudler
Senior Systems Engineer
I-Fusion Networks
Phone : 021-531-4042
Fax : 021-531-4062
Mobile : 082-575-4049
E-mail : [EMAIL PROTECTED]
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
