Using the "neighbor x.x.x.x command changes the multicast to a unicast -
problem solved.
neighbor ip-address [priority number] [poll-interval seconds] [cost number]
Louie
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
[EMAIL PROTECTED]
Sent: Tuesday, September 19, 2000 9:39 PM
To: John Kaberna
Cc: [EMAIL PROTECTED]; Lorenzo Montezemolo
Subject: Re: PIX and OSPF
But what about the routing updates that needs to be multi casted between the
two
OSPF routers.
"John Kaberna" <[EMAIL PROTECTED]> on 09/20/2000 02:57:47 AM
Please respond to "John Kaberna" <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
cc: "Lorenzo Montezemolo" <[EMAIL PROTECTED]> (bcc: Abdul
Mateen/Satyam)
Subject: Re: PIX and OSPF
Don't pass any info from the ISP inside. Use the PIX as your default
gateway
for outbound traffic and on the PIX point the default to the inside ethernet
of
your Internet router. On the Internet router point to your ISP. Very
standard
practice.
John
Lorenzo Montezemolo <[EMAIL PROTECTED]> wrote in message
8q8fjg$t76$[EMAIL PROTECTED]">news:8q8fjg$t76$[EMAIL PROTECTED]...
> How would this work if NAT were in place? We're thinking about doing
> something similar where we have our ISP-managed router passing
> default-network information from outside, through the PIX, and to the
> inside. Any thoughts?
>
> Lorenzo
>
>
>
> ""Omar Baceski"" <[EMAIL PROTECTED]> wrote in message
> [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> | you can put an explicit neighboring between the routers to avoid using
> | multicast. then you need to put a coumple conduits to let ospf
passtrough.
> |
> |
> |
> | > -----Mensaje original-----
> | > De: Nabil Fares [SMTP:[EMAIL PROTECTED]]
> | > Enviado el: Tuesday, September 19, 2000 2:38 PM
> | > Para: [EMAIL PROTECTED]
> | > Asunto: PIX and OSPF
> | >
> | > Greetings,
> | >
> | > I'm testing PIX515 and I've couple of questions concerning OSPF. I'll
> be
> | > installing a PIX between 2 7XXX router:
> | >
> | > Router-C1>------PIX515------>Router-C2
> | > OSPF OSPF
> | >
> | >
> | > Do I've to do anything special on PIX to pass OSPF? Any help is
great.
> | >
> | >
> | > thanks,
> | >
> | > Nabil
> | >
> | > **NOTE: New CCNA/CCDA List has been formed. For more information go to
> | > http://www.groupstudy.com/list/Associates.html
> | > _________________________________
> | > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> | > FAQ, list archives, and subscription info: http://www.groupstudy.com
> | > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> |
> | **NOTE: New CCNA/CCDA List has been formed. For more information go to
> | http://www.groupstudy.com/list/Associates.html
> | _________________________________
> | UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> | FAQ, list archives, and subscription info: http://www.groupstudy.com
> | Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> |
>
>
> **NOTE: New CCNA/CCDA List has been formed. For more information go to
> http://www.groupstudy.com/list/Associates.html
> _________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
