Hi! at the moment i am simulating isdn-circuits with two cisco 2600 and an isdn-pbx. the router is dialing - i get back a SETUP_ACK but get disconnected some time later. Cause: DISCONNECT Cause i = 0x819C - Invald Number format or Special Intercept ? All interfaces are up ! Layer 1 Status: ACTIVE Layer 2 Status: TEI=64, Ces = 1 SAPI = 0 , State = Multiple_Frame_Esablished Layer 3 Status : 0 Active Calls Did i configure the PBX incorrectely ? do i need ISDN SPIDs for isdn-switch type basic-ni ? i would appriciate any help ! thanx in advance hans **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _________________________________ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
