The interface will dial the same number specified in the dial string command
or dailer map statement. The number is usually a hunt group or a PRI.
Lonnie
""vlan2"" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> interface dialer 5
> dialer string 5551212
> dialer load-threshold 127
>
> I understand that this will bring up the second B channel when the load
> reaches 50% but my question is:
>
> How does it know what number to dial? I have only configure one number
> using the dialer string.
>
> How does my router know what number belongs to the second B channel?
>
>
> Many thanks......vlan2
>
>
> **NOTE: New CCNA/CCDA List has been formed. For more information go to
> http://www.groupstudy.com/list/Associates.html
> _________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
