Is it a T1 csu or a 56k CSU? On a 56k CSU, a rollover will work fine (wires
1,2 - 7,8). However, on a T1 CSU, you'll need to make a cable that crosses
1,2 - 4,5. HTH
Craig Johnson, CCNP, CCDP
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Jeff Miller
Sent: Monday, September 25, 2000 9:17 AM
To: [EMAIL PROTECTED]
Subject: Connecting Cisco CSU/DSU for Testing
Group,
I need to connect some Cisco integrated CSU/DSU together for testing and
have been unsuccessful thus far. Could anyone tell me what the pinouts are
to accomplish this task. I have tried a cross-over, roll-over, and even a
straight-through cables with no luck.
Thanks,
J Miller
CCNP
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
