You
might try to back out to 11.4
I had
the some NAT issues with 12.X; back down
to 11.4 fixed it!
Also B4 doing that; U might try to check the
translation table when U R having the problem.
Hao
Vu
INS
Hello groups,
I'm using NAT on Cisco 3000 running ios
12.1. I also using NAT Static to mapping port. (i.e ip nat inside source
static tcp 10.0.0.254 80 64.x.x.x 80 ). It works fine... but sometime
when I reboot computer have ip 10.0.0.254 and computer display IP
conflict error (its showing MAC address conflict with...which is my
ethernet interface on Cisco 3000). I have to restart/reboot the router
and the conflict disappear.... But sometime it happen again when I reboot my
computer.
Already tried:
1) I ugrade from version 11.3 to 12.1 still get
same error.
2) Map IP NAT Static to different computer (or IP
address) and running computer that have map IP on router, still get exactly
error.
Any solution with IP NAT Static ?
Thanks
|
