i swear that I read somewhere (possibly in Ivan Pepelnjak's EIGRP n/w design
sol'ns) that you can re-distribute osfp>eigrp or vice versa, but using some
sort of filter/distribute list command in the routing process, to define the
cost/admin distance of the imported routes between routing processes.
the other thing i can think of is the 'k' values in eigrp that determine the
route/link cost may need to be changed to mimic that of ospf (as ospf only
uses b/w to determine cost, eigrp uses b/w, delay and a few others). this
could be another reason the routing table doesn't make sense.
hope this helps!
(sorry, I don't have my ref books on hand, otherwise i'd refer you to the
page)
Regards,
Nicholas Monjo
Network Specialist
Smart Integration
Smart Consulting
Members of the Smart Communications Group.
Mobile: +61 408 567 367
Phone: +61 2 8258 7710
Fax: +61 2 8258 7790
Email: [EMAIL PROTECTED]
URL: http://www.smartgroup.com.au
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
