The aditional 'octet' is a typo. The addresses are 196.1.1.1 and 196.1.1.2,
of course.

<[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
>
>
> Interesting IP addresses you have on the BRI ports.  I assume you have
fudged
> them for security and mis-typed, because I'd be surprised if any router
would
> accept them.  You might want to check that your real addresses are OK.
> Having said that, I doubt it's the cause of the problem - the output of
the
> debugs mentioned by 'clue' could be useful though.
>
> JMcL
> ---------------------- Forwarded by Jenny Mcleod/NSO/CSDA on 28/09/2000
09:28 am
> ---------------------------
>
>
> [EMAIL PROTECTED] (Clue Less) on 27/09/2000 10:51:04 pm
>
> Please respond to [EMAIL PROTECTED] (Clue Less)
>
>
> To:   [EMAIL PROTECTED]
> cc:    (bcc: JENNY MCLEOD/NSO/CSDA)
> Subject:  Re: ISDN - I can't ping bri0
>
>
>
> Not sure, could you do a 'debug isdn q931' and 'debug ppp neg' to find
> out how far it gets?
>
> Clue.
>
> On 26 Sep 2000 21:58:41 -0400, [EMAIL PROTECTED] ("Ron S") wrote:
>
> >Can you please help here ?
> >From routerA I try to ping RouterB and ping is unsuccessfull ?
> >
> >#show dialer displays "Last status:Fail", Last called: 00:00:16
> >
> >#show isdn status seems OK on both routers;
> >State=MULTIPLE_FRAME_ESTABLISHED
> >spid1 sent, spid1 valid...
> >
> >#show int bri0
> >bri0 is up, line protocol is up (spoofing)...
> >
> >
> >
> >
> >
> >ROUTERA
> >hostname RouterA
> >!
> >enable password cisco
> >username RouterB password 7 03075
> >isdn switch-type basic-ni1
> >!
> >int s0
> >no ip add
> >!
> >int bri0
> >ip add 196.1.1.1.1 255.255.255.0
> >encap ppp
> >isdn spid1 5101 8995101
> >isdn spid2 5102 8995102
> >dialer idle-timeout 90
> >dialer map ip 196.1.1.2 name RouterB broadcast 8995201
> >
> >dialer load-threshold 1
> >dialer-group 1
> >no fair-queue
> >ppp auth chap
> >ppp multilink
> >!
> >no ip classless
> >dialer-list 1 protocol ip permit
> >!
> >line con 0
> >password cisco
> >login
> >line aux 0
> >line vty 0 4
> >login
> >!
> >end
> >
> >
> >ROUTERB
> >
> >hostname RouterB
> >!
> >enable password cisco
> >username RouterA password 7 03075
> >isdn switch-type basic-ni1
> >!
> >int s0
> >no ip add
> >!
> >int bri0
> >ip add 196.1.1.1.2 255.255.255.0
> >encap ppp
> >isdn spid1 5101 8995201
> >isdn spid2 5102 8995202
> >dialer idle-timeout 90
> >dialer map ip 196.1.1.1 name RouterA
> >
> >dialer-group 1
> >no fair-queue
> >ppp auth chap
> >ppp multilink
> >!
> >no ip classless
> >dialer-list 1 protocol ip permit
> >!
> >line con 0
> >password cisco
> >login
> >line aux 0
> >line vty 0 4
> >login
> >!
> >end
> >
> >
> >**NOTE: New CCNA/CCDA List has been formed. For more information go to
> >http://www.groupstudy.com/list/Associates.html
> >_________________________________
> >UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> >FAQ, list archives, and subscription info: http://www.groupstudy.com
> >Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >
>
> **NOTE: New CCNA/CCDA List has been formed. For more information go to
> http://www.groupstudy.com/list/Associates.html
> _________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
>
>
>
> **NOTE: New CCNA/CCDA List has been formed. For more information go to
> http://www.groupstudy.com/list/Associates.html
> _________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>


**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to