the cfgmaker should automatically make a mrtg.cfg file of all the active
interfaces on a switch. Otherwise, it will REM them out as
inactive. Uncomment the lines in your mrtg.cfg file to monitor all the ports.
My only explanation why it won't pull info from the fourth switch is maybe
a misconfigured SNMP community string.
At 02:30 PM 9/27/2000 -0700, Dave Santeramo wrote:
>Why would MRTG not pull stats from a switch if all the switches are configured
>the same? I have 4 switches located in the same location. I can pull
>data off three of them but not the fourth? any suggestions?
>Also, can anyone tell me how to configure MRTG to pull data for each
>individual switch port?
>
>Dave Santeramo - MCSE,CCNA
>[EMAIL PROTECTED]
>
>
>
>___________________________________________________________________
>To get your own FREE ZDNet Onebox - FREE voicemail, email, and fax,
>all in one place - sign up today at http://www.zdnetonebox.com
>
>**NOTE: New CCNA/CCDA List has been formed. For more information go to
>http://www.groupstudy.com/list/Associates.html
>_________________________________
>UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
>FAQ, list archives, and subscription info: http://www.groupstudy.com
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
