Actually they are both one and the same. The coding in the way the T1 is
setup at the CO makes it viable to be used as a T1. Both provides 1.544mbs
bandwidth. The test is wrong unless it gears towards voice technology.
Derek S. Winchester
Sr. WAN Engineer(CCNP)
Data Communications
[EMAIL PROTECTED]
Phone: 410-953-4887
Cell: 443-562-3456
-----Original Message-----
From: NetEng [mailto:[EMAIL PROTECTED]]
Sent: Thursday, September 28, 2000 10:44 AM
To: [EMAIL PROTECTED]
Subject: PRI vs T1
Is there a difference between a PRI and a T-1? What has 23B + 1D? What one
has 24B? The reason I ask is I have a practice question that asks, "what
provides 1.544Mbs bandwidth." PRI and T-1 are answers, but only PRI is the
correct answer (according to the test). What's the final answer????
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
