http://www.cisco.com/warp/public/473/29.html
try setting up IRB w/ BVI if you have a complete ISL net (example 2), if you
also switches that only support 802.1q then try setting up port channel, I
never worked on the 6xxx family but it runs off the same philosophies.
Hope this helps,
Matt
-----Original Message-----
From: BB [mailto:[EMAIL PROTECTED]]
Sent: Friday, September 29, 2000 10:07 PM
To: [EMAIL PROTECTED]
Subject: catalyst 2948G-L3, how to enable routing between VLAN?
as titled
Baron
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
