Thank you!

One more question: when I configure PIX as DHCP
server, it only allows 10 addresses in the pool. 
Here is what I got:

pixfirewall(config)# dhcpd address
10.1.1.101-10.1.1.150 inside
Number of addresses exceeds limit

Is 10 max?

Thanks in advance.



Jim

--- Todd Plambeck <[EMAIL PROTECTED]> wrote:
> In the new version of PIX software 5.2(1) you can
> nat to an interface.
> Instead of the old command "global (outside) 1
> x.x.x.x"  use the command
> " global (outside) 1 interface ". You can read up on
> this new feature at:
> 
>
http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_v52/pixrn522.htm#xtocid752631
> 
> I hope this helps.
> 
> Todd
> CCNP/CCDP
> 
> Jim Bond wrote:
> 
> > Hello,
> >
> > I have only 1 ip address assigned by my ISP, how
> can I
> > use PIX to do NAT? Looks like PIX requires at
> least 2
> > outside ip addresses, one for outside interface,
> one
> > for PAT. Is there a way to use only 1 ip address?
> >
> > Thanks in advance.
> >
> > Jim
> >
> > __________________________________________________
> > Do You Yahoo!?
> > Yahoo! Photos - 35mm Quality Prints, Now Get 15
> Free!
> > http://photos.yahoo.com/
> >
> > **NOTE: New CCNA/CCDA List has been formed. For
> more information go to
> > http://www.groupstudy.com/list/Associates.html
> > _________________________________
> > UPDATED Posting Guidelines:
> http://www.groupstudy.com/list/guide.html
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com
> > Report misconduct and Nondisclosure violations to
> [EMAIL PROTECTED]
> 


__________________________________________________
Do You Yahoo!?
Yahoo! Photos - 35mm Quality Prints, Now Get 15 Free!
http://photos.yahoo.com/

**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to