Use the cable kit that comes with every router. Using the DB-25 connector that says
modem.
Doing a reverse telnet to 2XXX depends on the type of router you have. If it is a
router with async lines then you have to use the last line availabe. If there are no
async interfaces then yes 2001 should be the one.
Chuck
if i would like to connect a modem ( elsa microlink 33.6 ) to the aux port which
cables to i have to use ?
aux (RJ45) ----------straight RJ45 cable -------- DB25Connector(DB25-DB9
Converter)-:Modem
is that right ?
thanx
hans
and reverse telnet to port 2001 ? isn‘t it ?
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
