Each LEC queries the ATM switch for the LECS ATM address via ILMI. To enable such queries to get a successful response from the ATM switch, the ATM address of the LECS should be configured into the ATM switch . Or staticly configure the LECS address on the LEC . PNNI is an ATM routing protocol used for routing call setups and is implemented in the ATM switches . It is not implemented in the LEC . flem --- cslx <[EMAIL PROTECTED]> wrote: > and how to config PNNI? > > > **NOTE: New CCNA/CCDA List has been formed. For more > information go to > http://www.groupstudy.com/list/Associates.html > _________________________________ > UPDATED Posting Guidelines: > http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: > http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] __________________________________________________ Do You Yahoo!? Yahoo! Photos - 35mm Quality Prints, Now Get 15 Free! http://photos.yahoo.com/ **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _________________________________ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]