Yes or NO,
The SX GBIC is a MM fiber frequency (850nm?)
The LX GBIC is a SM fiber frequency (1150?nm) If u want to run it over MM
then you MUST use a conditioner cable
The ZX GBIC is SM only.
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
NetEng
Sent: Friday, October 06, 2000 3:39 PM
To: [EMAIL PROTECTED]
Subject: GBIC fiber
I have an GBIC with SC connectors. Does Cisco require a special cable to
connect to the GBIC?
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
