Is each site connected to the other 2, so it is a full mesh? In this
case, it should flow automatically.
Brian
On Tue, 10 Oct 2000, Hitesh Pathak (CSD-BBYRO-RTSG) wrote:
> Friends,
>
> Need ur help...
>
> I hv my 3 sites connected with each other via leased lines. Now let's say my
> link between r1 & r3 goes down & I want my traffic from r3 to reach to r1
> thru r2. My network is running EIGRP. I am not able to ping to my router r1
> from r3 (via r2) when my link between r1 & r3 goes down. Do I need to define
> any ip route command . how can I resolve this issue..... What additional
> commands do I need to configure....do I need to set some proirity for link .
>
>
>
>
> r1-----------------r2
>
>
> r3
>
>
> thanx
> HP
>
> **NOTE: New CCNA/CCDA List has been formed. For more information go to
> http://www.groupstudy.com/list/Associates.html
> _________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
