For the redundancy part you can define two static routes. Just make the
administrative distance on the "backup" higher than 1. Something like:
ip route 0.0.0.0 0.0.0.0 s0
ip route 0.0.0.0 0.0.0.0 s1 10
Don't know about the monitoring software? HP Openview? CiscoWorks?
/Jared
-----Original Message-----
From: Pete [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, October 11, 2000 8:07 PM
To: [EMAIL PROTECTED]
Subject: redundancy
This is what I have to work with. I have 2 T1, each going into s0 and s1.
What can I do to enable redundancy? If the T1 in s0 fails , s1 will
automatically kick in and takeover.
Also , what monitoring software do any of you use to monitor your networks.
specifically for network outages?
Pete
_____NetZero Free Internet Access and Email______
http://www.netzero.net/download/index.html
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
