Groupstudy list Gurus I am having some serious trouble setting up my 2522 router as a frame switch. I am using the frame relay hub and spoke example Lab #13 from the All-in-one CCIE lab study guide. I am entering the commands just like in the book, but I one of the spoke interfaces comes up for a short time, and then goes down. When I show int I get Serial0 is up, line protocol is down (looped). What's that about? the frame switch sho run gives <-edited-> interface Serial0 no ip address encapsulation frame-relay no fair-queue clockrate 64000 frame-relay lmi-type ansi frame-relay intf-type dce frame-relay route 200 interface Serial1 200 ! interface Serial1 no ip address encapsulation frame-relay clockrate 64000 frame-relay lmi-type ansi frame-relay intf-type dce frame-relay route 200 interface Serial0 200 frame-relay route 210 interface Serial2 210 ! interface Serial2 no ip address encapsulation frame-relay clockrate 64000 frame-relay lmi-type ansi frame-relay intf-type dce frame-relay route 210 interface Serial1 210 and the bad spoke sho run gives <-edited-> ! interface Serial0 ip address 192.1.1.4 255.255.255.0 encapsulation frame-relay no fair-queue frame-relay lmi-type ansi I hope I have been descriptive enough, and thanks in advance. Boris ____________NetZero Free Internet Access and Email_________ Download Now http://www.netzero.net/download/index.html Request a CDROM 1-800-333-3633 ___________________________________________________________ _________________________________ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
