Is this the only issue? Are you routing properly between VLANs? Can you ping the PIX? If telnet from VLAN2 is the only thing blocked, it sounds like a rule issue.
-----Original Message-----
From: p s [mailto:[EMAIL PROTECTED]]
Sent: Thursday, October 12, 2000 11:18 AM
To: [EMAIL PROTECTED]
Subject: Cisco Pix Telnet Access
To Cisco Study Group
I have a Cisco 515 Pix Firewall that I cannot Telnet
to from my 10.10.9.0 network. I just created VLAN 2
on my Cisco 6503 Switch, VLAN 2 contains the entire
10.10.9.0 network. VLAN1 contains the 10.10.10.0
network. My 6503 switch connects through an MSFC
interface to a T1 which connects to our Data Center
where the Pix Firewall is located. Does anyone have
any ideas on what would cause this Telnet issue?
Thanks for your help
Paul Stapleton
[EMAIL PROTECTED]
__________________________________________________
Do You Yahoo!?
Get Yahoo! Mail - Free email you can access from anywhere!
http://mail.yahoo.com/
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
