check if you can do this:
Router(config)# ip dhcp pool net-172 and press Enter
If it replies with the mode below then your router has the capability of
DHCP server service:
Router(config-dhcp)#
then follow this url to config:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120
t/120t1/easyip2.htm#xtocid231010
(watch the word wrap)
If it replies with an error or DID NOT get into that mode (router(config)#)
then
your router doesn't have DHCP server services.
Hope this helps!
-----Original Message-----
From: John D.C. [mailto:[EMAIL PROTECTED]]
Sent: 16 October 2000 09:36
To: [EMAIL PROTECTED]
Subject: Access Server as DHCP Server
Hi,
This is my first time joining this "great" mailing list. And I have several
problems which make me gonna crazy.
Is there anybody know about how to make an Access Server (in Async. mode for
Cisco 2509) as DHCP Server ? I mean it's could give the client : ip address,
subnet mask, default gateway.
Could U give me the URL or sample configuration ?
What's the fuction of command async-bootp xxxx ?
Please advice me and Thank's for your great support !!!
John.
____________________________________________________________________
Get free email and a permanent address at http://www.netaddress.com/?N=1
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
