If your utilization is below 40% don't touch it. Above 40% and you start
looking at things like Priority or Custom queuing, reducing bandwidth used
by unnecessary routing updates or keepalives, reducing unnecessary trafic
accross the wan Link (Cached Name resolution on the router...) Then there
are some gains (at a cost of higher latency) by usinig TCP Header
compression and Data Compression, but both of these require more processing
power in the router. (That's all I can think of without more specifics.)
Oh, and if you're using TDM to share the line with voice traffic, you can
consolidate with a couple of ATM switches., and make the Voice traffic
"Share" it's wasted bandwidth
----Original Message Follows----
From: "net974 at Yahoo" <[EMAIL PROTECTED]>
Reply-To: "net974 at Yahoo" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Subject: Optimizing link
Date: Wed, 18 Oct 2000 04:50:13 +0530
Hi,
What are the possible ways through which we can otimize the link and use
maximum out of a leased line.
TIA
Gm
_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
Share information about yourself, create your own public profile at
http://profiles.msn.com.
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]