Yup, you simply have to setup the static commands between the outside and
the inside interfaces and conduit statements for the particular ports and
host.
Don Gardner
Network Analyst
CH2M HILL
-----Original Message-----
From: SH Wesson [mailto:[EMAIL PROTECTED]]
Sent: October 23, 2000 3:27 PM
To: [EMAIL PROTECTED]
Subject: PIX w/ 3 Interfaces
Currently my PIX has two interfaces. I'm getting ready to add another
interface to my PIX to make it 3 interfaces to make a separate DMZ network.
My question is, when a user on the outside tries to access a server on on
the network on the inside (not dmz), is that doable. Also, I haven't been
able to find a full blown very very detailed sample config of a 3 interface
PIX configuration. If someone could share their 3 interface PIX
configuratin with me, I would greatly appreciate it.
Thanks.
_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
Share information about yourself, create your own public profile at
http://profiles.msn.com.
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
