some thing to do when you have crc errors:
1. open a tbl tkt with your carrier (they should do extensive tests)
2. verify that timing is slave and not master
3. verify that your ports and cables are good
4. make sure your csu looks for the appropriate number of channels (fract T
ckt)
Makeeda
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> Ramesh c
> Sent: Monday, October 23, 2000 7:50 AM
> To: [EMAIL PROTECTED]
> Subject: CRC error
>
>
> Hi cisco guru,
>
> I have a lease line(connected to serial port).I get about 60% crc
> error per day on the line.What could be the cause and any solutions?
>
>
> Thanks
> Regards
> Ramesh
>
>
> Get FREE Email/Voicemail with 15MB at Lycos Communications at
> http://comm.lycos.com
>
> _________________________________
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
