Group,
I have a Cisco 3548 XL with two VLANs on it (VLAN 1 and VLAN2).
Some of the ports on the switch are set to multaccess ports for access to
both VLANs. This setup works fine for about a day and then the computers on
these multaccess VLAN ports can not talk with the main VLAN1, but can talk
to VLAN2. After about a week, everytime a computer reboots, it can not
login to the domain because the domain controllers are on VLAN1. If I reset
the VLAN ports, everything is fine.
Any ideas?
Thanks,
Wayne
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
