Sorry for being off subject, but I found very little information for
the paper that I am working on for class, comparing lease-line
vs frame relay.
It seems that most favor frame-relay over leased-line because
of cost, no one compare their merits. In my paper, I presume
that the cost is the same for a full-T1 leased-line and a full-T1
frame-relay (port/CIR) connection between two sites. The plan
is to send video, voice and data across the connection. What
are the merits of one over the other?
I have considered the constant signal required for controlling
the voice PBX lines. I picked the full-T1 CIR for frame relay to
eliminate the burst problem. How should I compare the
dedicated channel on the lease line to something equivalent
on the frame relay?
I am looking for some input, if you have any thanks in advance
for your input. If not please refrain from flaming, thanks.
Trang D. Nguyen ([EMAIL PROTECTED])
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
