o.k. o.k. misread the question. You are right.
-----Original Message-----
From: A. Geoffrey Cauchi [mailto:[EMAIL PROTECTED]]
Sent: 27 October 2000 10:36
To: McCallum, Robert; 'Roland Mok'; [EMAIL PROTECTED]
Subject: Re: 100M FastEthernet
100Mb Fast Ethernet will never work at 10Mb, the solution suggested will
only work on a 10/100Mb port
Regards
Geoff
----- Original Message -----
From: "McCallum, Robert" <[EMAIL PROTECTED]>
To: "'Roland Mok'" <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
Sent: Friday, October 27, 2000 10:20 AM
Subject: RE: 100M FastEthernet
> int fast0/0
> speed 10
> duplex half
>
> -----Original Message-----
> From: Roland Mok [mailto:[EMAIL PROTECTED]]
> Sent: 27 October 2000 02:42
> To: [EMAIL PROTECTED]
> Subject: 100M FastEthernet
>
>
> Could anyone tell me how to manually force 100M FastEthernet (not
> 10/100M) to work on 10M Ethernet connection?
>
> _________________________________
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
