point less you would have to use a 224 mask so if there is a couple of
routers you would have addresses. A 240 would only support 14 hosts. Unless
you had 16 routers supporting those 16 hosts then I would recommend a 192.
:>)
And who is this they
Duck
----- Original Message -----
From: . <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Saturday, October 28, 2000 3:45 AM
Subject: Subnetting questions
> Hi Friends
>
> In a subnetting scenario, say for example they say that "Configure the
> ethernet network so that it can support 16 hosts."
>
> Do they mean 16 hosts including all the IP's for the routers in the
network,
> or does it mean 16 host IP's in addition to the router IP's.
> Please let me know
>
> Thanks
>
> SV
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
