On Wed, 1 Nov 2000, Adrian Chew wrote:
> Brian,
>
> You have to be persistent and work really hard with "sh line". Look at the
> DTR, DCD, etc and check out the troubleshooting guide for modems/async ports
> on CCO. Check out the pinouts on connectors - there are non-standard
> pinouts on some of the old equipment - enough for some stuff to work, but
> cause other problems.
>
Thanks,
I had to "clear line x" and then it started working........
> I've seen...
>
> 2511 - 2924 requires a "modem dtr-active" on the 2511 line config to work
> 4700 with modems - using the normal console connector to rollover
> cable/straight cable to modem connector doesn't work for aux port - you get
> some dialing, etc, but signalling isn't complete - the connector is missing
> at least 1 required pin that is used
> LS100 - can't remember what finally worked - might have custom made the
> converter (DB-9 to RJ-45) on the LS100-side
> 766 - think you use a straight instead of rollover cable
>
> Regards,
> Adrian
>
> "Brian" <[EMAIL PROTECTED]> wrote in message
> [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> >
> > I am using a 2511 to reverse telnet into my lab. Everything works fine
> > except the Catalyst 2901.
> >
> > If I hook a cisco console cable from the 2901 to my pc, it works fine. If
> > I use my 2511 to console into it, it doesn't work:
> >
> > r2511#s2901
> > Trying s2901 (192.168.1.1, 2006)...
> > % Connection refused by remote host
> >
> > What has to be done to connect to the catalyst? Everything is
> > 9600/8/n/1.
> >
> > Brian
> >
> >
> > -----------------------------------------------
> > Brian Feeny, CCNP, CCDP [EMAIL PROTECTED]
> > Network Administrator
> > ShreveNet Inc. (ASN 11881)
> >
> > _________________________________
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >
>
>
> _________________________________
> FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
-----------------------------------------------
Brian Feeny, CCNP, CCDP [EMAIL PROTECTED]
Network Administrator
ShreveNet Inc. (ASN 11881)
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]