type dir flash: to see whether your IOS is missing,
to do disaster recovery change the default baud rate to 115200 to make it
faster than 9600 but don't for get to change the baud rate on your
hyperterm.
-----Original Message-----
From: Ahmad bilal [mailto:[EMAIL PROTECTED]]
Sent: Monday, November 06, 2000 12:21 PM
To: [EMAIL PROTECTED]
Subject: Re: urgent help needed: rommon 1 >
Most probably your image is gone or you pressed they break sequence check
your
config-register .To Download image through tftp in rommon do the following
IP address of the router.
IP_ADDRESS= x.x.x.x
Subnet mask of the router.
IP_SUBNET_MASK= x.x.x.x
IP address of the default gateway of the router.
DEFAULT_GATEWAY= x.x.x.x
IP address of the TFTP server from which the software will be downloaded.
TFTP_SERVER= x.x.x.x
The name of the file that will be downloaded to the router.
TFTP_FILE=cm200.x
Or if your Ether isnt working try loading from console.type
xmodem file name
wait for romon to prompt you to send file via hyperterminal
...
then transfer file via hyperterminal it can take some time :)
Regards,
Ahmad Bilal
Hubert Pun wrote:
> The Cisco 3620 router boot up as the above prompt "rommon 1 > "
>
> Is it because the IOS image is gone? or is it because I typed something
> at the boot up process and make it to be like this?
>
> In this prompt,
> How can I check what IOS image my router is having now?
> and how can I download IOS image, in case that the IOS image is
> corrupted, to router? Previously I used "copy tftp flash" in the normal
> prompt. What command to use in this rommon prompt?
>
> Thanks in advanced
>
> Hubert
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
