Hi,
Didn't see any CRC errors on your show int results.
The CRC 16 refer there is the 16-bit CRC used for that interface. It's not
an error.
Thanks.
At 02:33 AM 11/6/2000 -0800, Study Cisco wrote:
>Hi all
>
>Can any one tell me when we get CRC like show as
>follows, what could be the problem, I am getting this
>on a serial interface (WIC) on E1 (2Mb) link.
>
>Thanks an adv.........
>
>****************************************************
>MTU 1500 bytes, BW 2048 Kbit, DLY 20000 usec, rely
>254/255, load 6/255
> Encapsulation HDLC, crc 16, loopback not set,
>keepalive set (10 sec)
> Last input 00:00:00, output 00:00:00, output hang
>never
> Last clearing of "show interface" counters 00:03:44
> Queueing strategy: fifo
>******************************************************
>
>
>__________________________________________________
>Do You Yahoo!?
>Thousands of Stores. Millions of Products. All in one Place.
>http://shopping.yahoo.com/
>
>_________________________________
>FAQ, list archives, and subscription info:
>http://www.groupstudy.com/list/cisco.html
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]