On Fri, 10 Nov 2000 23:00:01 -0500 (EST), Marco Rodrigues wrote:
> Hello Group,
>
> I dont' know if anyone found this yet, but I couldn't find an
> errata on the ciscopress homepage so here it goes. On Pg .100 it states
> that a VLAN ID header is 10 bits long in the first 26 bytes of the ISL
> encapulation. But later in Figure 3-7 it says the VLAN ID field is 15
> bits. Can someone clarify this for me?
>
> Another issue is on Pg 104 is says original ethernet frames can't exceed
> 1518 bytes. But they state that if using 802.1q the frame becomes 1522
> bytes long. I thought 802.1q inserts it's information into the exsisting
> ethernet frame and ISL encapulates it making the size of the frame 1522
> bytes. Can someone also clarify this of me?
>
> Thanks in advance
>
>
>
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_______________________________________________________
Tired of slow Internet? Get @Home Broadband Internet
http://www.home.com/xinbox/signup.html
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
