Try sh mls entry.
Your 6509 will have this feature by default. But do you have a RSM module
for the 5000?
Good luck.
""Sites, Bob"" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]..
.
> I guess I need to clarify this a little. Yes, I'm talking about Cisco
> switches, 6509 & 5000's. No, I'm not looking for MAC addresses. I thought
> that there was a command that would list the IP of all connecting devices
on
> (all) ports on the switch. The "sho cdp nei det" or other variations only
> shows the ip of the ports that are "trunking." I need all of the ports,
not
> just the trunking ports. Any ideas?
>
>
> Can someone refresh my memory on this. What is the command on a switch
that
> will show you the IP address of connecting devices on the ports? Can't
seem
> to get any hits in the archives. I use it so seldom I've forgotten what it
> was?
>
> Bob Sites, CCNA
> System Engineer
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
