there isn`t a mistake as such .......spanning tree cisco version PVST does
NOT work with other variants..ie ieee spanning tree...
what you need to do is
1 either use a cisco router for trunking OR use PVST+ which is compatible
with non cisco eqiupment
check cisco.com for more info
steve
>From: Piatnitchi Cristian <[EMAIL PROTECTED]>
>Reply-To: Piatnitchi Cristian <[EMAIL PROTECTED]>
>To: "'" <[EMAIL PROTECTED]>
>Subject: Cat5000, BayStack350 and 802.1q trunking
>Date: Mon, 13 Nov 2000 17:15:41 +0200
>
>Hi all
>
>I am trying to connect a Catalyst 5505 and a BayStack350 using a 802.1q
>trunk.
>My setting are the following. It doesn't work . The only configuration
>which
>works is when
>I put Disable on STP Learning (see below) in BayStack config. I really need
>STP for both of them.
>I cannot disable it !
>
>Catalyst trunking ports : 2/18, 2/19
>Where is the mistake ?
>
>Thanks in advance
>Cristian Piatnitchi
>
>************************************Cat5505*********************************
>**************************
>
>set vlan 1 name default type ethernet mtu 1500 said 100001 state active
>
>#spantree
>#uplinkfast groups
>set spantree uplinkfast disable
>#backbonefast
>set spantree backbonefast disable
>#vlan 1
>set spantree enable 1
>set spantree fwddelay 15 1
>set spantree hello 2 1
>set spantree maxage 20 1
>set spantree priority 4000 1
>
>
>
>clear trunk 2/18 2-1005
>set trunk 2/18 nonegotiate dot1q 1
>clear trunk 2/19 2-1005
>set trunk 2/19 nonegotiate dot1q 1
>
>set spantree portfast 2/17-24 disable
>
>
>
>Port Mode Encapsulation Status Native vlan
>-------- ----------- ------------- ------------ -----------
> 2/18 nonegotiate dot1q trunking 1
> 2/19 nonegotiate dot1q trunking 1
>
>****************************************BAyStack
>Configuration*****************************************
>
> MultiLink Trunk Configuration
>
>Trunk Trunk Members STP Learning Trunk Mode Trunk
>Status
>----- ------------------------------- ------------ ---------------
>------------
> 1 [ /23 ][ /24 ][ / ][ / ] [ Eanbled ] Basic [
>Enabled ]
> 2 [ / ][ / ][ / ][ / ] [ Normal ] Basic [
>Disabled ]
> 3 [ / ][ / ][ / ][ / ] [ Normal ] Basic [
>Disabled ]
> 4 [ / ][ / ][ / ][ / ] [ Normal ] Basic [
>Disabled ]
> 5 [ / ][ / ][ / ][ / ] [ Normal ] Basic [
>Disabled ]
> 6 [ / ][ / ][ / ][ / ] [ Normal ] Basic [
>Disabled ]
>
>
>
> VLAN Configuration
>
> Create VLAN: [ 1 ]
> Delete VLAN: [ ]
> VLAN Name: [ VLAN #1 ]
>
> Port Membership
> 1-6 7-12 13-18 19-24
> ------ ------ ------ ------
> Unit #1 UUUUUU UUUUUU UUUUUU UUUUTT
>
>
> VLAN Port Configuration
>
>
>
> Port: [ 23 ]
> Filter Tagged Frames: [ No ]
> Filter Untagged Frames: [ No ]
> Filter Unregistered Frames: [ No ]
> Port Name: [ Port 1 ]
> PVID: [ 1 ]
> Port Priority: [ 0 ]
>
> Port: [ 24 ]
> Filter Tagged Frames: [ No ]
> Filter Untagged Frames: [ No ]
> Filter Unregistered Frames: [ No ]
> Port Name: [ Port 1 ]
> PVID: [ 1 ]
> Port Priority: [ 0 ]
>
>
>
>
>Cristian Piatnitchi
>
>_________________________________
>FAQ, list archives, and subscription info:
>http://www.groupstudy.com/list/cisco.html
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
Share information about yourself, create your own public profile at
http://profiles.msn.com.
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
