The network modules w/out integrated CSU's have a DB15 connector and must
connect to an external CSU. The ones with CSU's connect directly to the
network with an RJ-48 cable.
The reasons I normally use them are that you have better management, fewer
devices to support and SmartNet maintenance.
Regards,
Eric Sineath
CCIE (R/S) #4504
CCIE (Design) #4504
Senior Consultant
SBC DataComm
-----Original Message-----
From: Stull, Cory [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, November 15, 2000 3:10 PM
To: '[EMAIL PROTECTED]'
Subject: simple NM question
What would be a normal reason to get a NM-1FE1CT1-CSU as opposed to just a
NM-1FE1CT1 ? Obviously one has a CSU and one doesn't but I would
appreciate it anyone can elaborate on why you would need one over the
other...
Thanks
Cory
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
