I have encountered problem and the problem is due to the Kingston Memory compatible
issue. Your can either get a 64 Flash or try another two piece of memory.
Ben Hockenhull wrote:
> I upgraded a 3640 to 32 meg of flash using two Kingston KCS-F3600/16 16
> meg flash simms.
>
> Upon power up, I get the following error messages, even after loading an
> image into flash. The router will not boot off of the internal flash. I
> can get it to boot off a PCMCIA card in slot0:, and when I sho flash, I
> see the image I tftp'd in, but it just doesn't work on boot. Ideas?
>
> System Bootstrap, Version 11.1(7)AX [kuong (7)AX], EARLY DEPLOYMENT
> RELEASE SOFTWARE (fc2)
> Copyright (c) 1994-1996 by cisco Systems, Inc.
> C3600 processor with 65536 Kbytes of main memory
> Main memory is configured to 64 bit mode with parity disabled
>
> unknown flash device - mandev code = 0xffff
> cannot read flash info
> getdevnum warning: device "flash" has size of zero
> unknown flash device - mandev code = 0xffff
> cannot read flash info
> getdevnum warning: device "flash" has size of zero
> open: read error...requested 0x4 bytes, got 0x0
> trouble reading device magic number
> boot: cannot open "flash:"
> boot: cannot determine first file name on device "flash:"
>
> --
> Ben Hockenhull
> [EMAIL PROTECTED]
>
> _________________________________
> FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
