It seems to me your missing a map list and map group. Like below. I assume
you're not using inverse ARP. In any case, I can't remember why you can't
ping a local interface, but it's normal. (route caching?)
interface atm 2/0
ip address 192.168.0.1 255.255.255.0
no keepalive
map-group my-atm
atm pvc 10 20 100 aal5snap
map-list my-atm
ip 192.168.0.2 atm-vc 1 broadcast
Rodgers Moore
""RANMA"" <[EMAIL PROTECTED]> wrote in message
8vaauv$mas$[EMAIL PROTECTED]">news:8vaauv$mas$[EMAIL PROTECTED]...
> Hello
>
> I am now configing a ATM circuit ...but faac a problem
>
> My first machine is a 7200 VRX with a ATM OC-3 interface card (slot 2 ,
> interface 0)
> and a machine which is a ERX router
>
>
> my configuration for the 7200 is
>
> int atm2/0
> ip address 192.168.0.1 255.255.255.0
> no shutdown
> atm pvc 10 20 100 aal5snap 9000 5000 2000
>
>
> I dont konw after I typed the above config....
> I cannot ping the interface 192.168.0.1
>
> is there any configuration I have missed or incorrect....
>
> any one can give me an example of "how to config the above interface " to
me
> ?
>
>
>
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]