Just
plug and go...W2K is Plug and Play and works quite well..better than Win9x ever
was. I too am curious as to why you would take this route. If you
are trying to run FEC and aggregrate bandwidth then be sure to distribute the
cards across all of the buses on the motherboard otherwise you will only
accomplish some fault tolerance. I have done some extensive performance
tests of aggregating 100Mbs cards using FEC (Fast Ether Channel....This was the
Intel Server Card) and the increased CPU load managing the FEC negated the
minimal increase in throughput...not to mention the major Disk Array
bottleneck.
Patrick
-----Original Message-----
From: L Reid [mailto:[EMAIL PROTECTED]]
Sent: Saturday, November 18, 2000 9:51 PM
To: [EMAIL PROTECTED]
Subject: 4 NET WORK CARDS IN ONE SERVER
From: L Reid [mailto:[EMAIL PROTECTED]]
Sent: Saturday, November 18, 2000 9:51 PM
To: [EMAIL PROTECTED]
Subject: 4 NET WORK CARDS IN ONE SERVER
How do I set up four network cards in one NT 2000 server?
Is there a book that you know of?
Thanks in advance guys
= = = = = = = = = = = = = = = = = =
[EMAIL PROTECTED]
= = = = = = = = = = = = = = = = = =
Do You Yahoo!?
Yahoo! Calendar - Get organized for the holidays!