From: Greene, Patrick [mailto:[EMAIL PROTECTED]]
Sent: Monday, November 20, 2000 2:23 PM
To: 'Adam Obszynski'; [EMAIL PROTECTED]
Subject: RE: GSR and Ethernet0
The E0 on the GSR RPS is strictly for management purposes and will not route. Just get a 2924 with an SX GBIC and you have ethernet. If you can afford a $30K Gig Line card then a $2000 switch should be no problem.
Patrick
-----Original Message-----
From: Adam
Obszynski [mailto:[EMAIL PROTECTED]]
Sent: Monday, November 20, 2000 10:43 AM
To: [EMAIL PROTECTED]
Subject: GSR and
Ethernet0
Hello cisco,
Do you know some cheap solution to connect ethernet clients to
GSR ?
I looking for solution ho to connect cheap.... BGP
peers via ethernet...
--
Regards,
Adam
Obszyński
ATM Inc.
+48-22-5156418
_________________________________
FAQ,
list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to
[EMAIL PROTECTED]
