John,
On way would be to use CWSI. Another would be to use the web based
java management tool found on CCO to manage all you switches. Now the
switch can be a standalone or member(s) of a VTP domain, the latter giving
you the ability to manage all of your switches from the Master/management
switch you will have defined...
HTH
Nigel...
----- Original Message -----
From: John Neiberger <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, November 21, 2000 10:10 PM
Subject: Catalyst 2924XL Config question
> Is there a way to configure a group of switch ports at the same time if
they
> are all changing in the same way? For instance, let's say that port 1-20
> are to be set to 100/Full and to VLAN2. Repeating the same config lines
20
> times is annoying. it would be nice if we could specify a range of ports
to
> apply config changes to.
>
> It even appears that they may have a way to do this, but I haven't figured
> out the syntax. If you type "int fa0/0?" it leads me down a path to
> frustration. It appears as if it's going to let me set a range, but it
> doesn't act how I assume it's going to.
>
> Do any of you know if there is a way to do this?
>
> TIA,
> John
>
>
>
>
>
> _______________________________________________________
> Tired of slow Internet? Get @Home Broadband Internet
> http://www.home.com/xinbox/signup.html
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
