when i dial in a 3640 ,before i setup the callback ,the user "frank"works,
after i setup callback ,and added the user "tom",tom works,the callback
succeeded,
but "frank" failed,so i guess the router must think "frank" is also a
callback user.Actually ,it's not .
I want to make some users be callback users,others not ,how can make such
config on the router ?
thanks.
frank
the following is cut from the running config:
username frank password 0 dd
username tom callback-dialstring 1001 password 0 ee
!
interface Group-Async1
ip unnumbered Serial1/0
no ip directed-broadcast
encapsulation ppp
dialer in-band
dialer callback-secure
async default routing
async mode interactive
peer default ip address pool default
ppp callback initiate
ppp authentication chap
group-range 65 72
!
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
