> Hi all, > > I have a Cisco 805 router do router ISDN in my home. Having problem with it. I had a Motorola BitSurf prior to and had no problem. > > The SPID auto-detect detected the SPID and Switch type properly, but I still get a SPID error message. > > Any help would be appreciated, > > Attached is the config and Q.931 debug. > > Thanks, > > Evan You -CCNA > > > ! > interface BRI0 > no ip address > no ip directed-broadcast > encapsulation ppp > dialer pool-member 1 > isdn switch-type basic-ni > isdn spid1 73275667910101 7866791 > isdn spid2 73275677190101 7867719 > ppp authentication chap pap callin > ppp multilink > ! > interface Dialer1 > description ISP > ip address negotiated > no ip directed-broadcast > no ip proxy-arp > ip nat outside > encapsulation ppp > no ip split-horizon > dialer remote-name RAS > dialer idle-timeout 300 > dialer string 18888515373 class isdn > dialer hold-queue 10 > dialer load-threshold 10 either > dialer-group 1 > pulse-time 0 > ppp authentication chap pap callin > ppp chap hostname ISDN > ppp chap password 7 04682E2F5D704646 > ppp multilink > ! > ip nat inside source list 18 interface Dialer1 overload > no ip http server > ip classless > ip route 0.0.0.0 0.0.0.0 Dialer1 > ! Looking at the config above, are you sure that the SPIDs were detected properly? If I am reading it correctly, you have a SPID of 73275667910101 with a local dial number of 7866791. Is it me, or does your LDN not match up to your SPID? Assuming your LDN is correct, shouldn't your full SPIDs read as follows: isdn spid1 73278667910101 7866791 isdn spid2 73278677190101 7867719 Just curious. Let me know if that was the issue. Also, I noticed on your configs that you specified CHAP as your primary authentication method, with PAP as a fallback. Please realize that from your given config, you have not specified any PAP parameters. HTH, Paul Werner ________________________________________________ Get your own "800" number - Free Free voicemail, fax, email, and a lot more http://www.ureach.com/reg/tag _________________________________ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
