BACS-Napa-2610#wr t
Building configuration...
Current configuration : 1602 bytes
!
version 12.1
service nagle
no service pad
service tcp-keepalives-in
service tcp-keepalives-out
service timestamps debug uptime
service timestamps log uptime
service password-encryption
!
hostname BACS-Napa-2610
!
enable secret cisco
!
!
!
!
!
clock timezone PST -8
clock summer-time PDT recurring
ip subnet-zero
no ip finger
no ip domain-lookup
!
no ip bootp server
isdn voice-call-failure 0
!
!
controller T1 0/0
framing esf
linecode b8zs
channel-group 0 timeslots 1-8 speed 64
tdm-group 1 timeslots 9-24
description T1 34HCGS005011/607PT FR MCI ID/NP52231100010001
!
controller T1 0/1
framing esf
linecode b8zs
tdm-group 1 timeslots 9-24
description T1 to PBX
!
!
!
!
interface Ethernet0/0
ip address 172.16.13.1 255.255.255.0
!
interface Serial0/0:0
description Frame Relay CIR 256kb, Burst 512kb
no ip address
encapsulation frame-relay IETF
frame-relay lmi-type ansi
!
interface Serial0/0:0.723 point-to-point
description Frame Relay to San Jose
ip address 172.16.16.2 255.255.255.252
frame-relay interface-dlci 100
!
ip classless
ip route 0.0.0.0 0.0.0.0 Serial0/0:0.723
no ip http server
!
connect PBX T1 0/0 1 T1 0/1 1
!
snmp-server engineID local 00000009020000036BEB0660
snmp-server location <snip>
snmp-server contact <snip>
snmp-server chassis-id JAB04378CU8
!
line con 0
transport input none
line aux 0
password cisco
login
modem Dialin
modem autoconfigure discovery
transport input all
speed 38400
line vty 0 4
password cisco
login
!
end
BACS-Napa-2610#
--
Jason Roysdon, CCNA, MCSE, CNA, Network+, A+
List email: [EMAIL PROTECTED]
Homepage: http://jason.artoo.net/
Cisco resources: http://r2cisco.artoo.net/
On Wed, 22 Nov 2000, AJ wrote:
> Would it be possible to post your config?
>
""Jason Roysdon"" <[EMAIL PROTECTED]> wrote in message
8vdel0$9p$[EMAIL PROTECTED]">news:8vdel0$9p$[EMAIL PROTECTED]...
> No doubt it's a nice box, but I'd say stick with Cisco gear if you can. I
> got to yank an Adtran 550 out two weekends ago when the original
installing
> company couldn't figure out how to make it talk to an old 3Com NetBuilder
II
> and it'd been a week of downtime for this new office.
>
> I showed up on site with a 2610 with a WIC 2-T1 DI module and had it up
> within 15 minutes (IOS upload was the longest thing). Channels 1-8 were
> getting used for data, 9-24 getting passed back out the second T1
interface
> to the PBX. Worked very nice ;-)
>
> "Alldread AK2 Robert J" <[EMAIL PROTECTED]> wrote in message
> F387C9D3CA43D31190E80090278A758E514065@CHPT0000SE04">news:F387C9D3CA43D31190E80090278A758E514065@CHPT0000SE04...
> > I was just wondering if anyone has used an ADTRAN 550 box to simulate FR
> or
> > ISDN links for a lab. If so, what is the price of the box and is it
worth
> > it??
> >
> > Thanks,
> >
> > Skin-e
> >
> > _________________________________
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >
>
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
