Try
this assumes you already have an enable passowrd set.
router#(config)line vty 0 4
router#(config-line)password (password)
router#(config-line)<cntl z>
and
set the enable password
router#(config)enable password (password)
All this stuff is available on the Cisco CD and or config manuals.
Teunis
Hobart, Tasmania
Australia.
On Thursday, November 23, 2000 at 06:46:39 PM, suaveguru wrote:
> hi anyone
>
> knows what's the command to set username and password
> for router logon for telnet
>
>
>
> suave guru
>
> __________________________________________________
> Do You Yahoo!?
> Yahoo! Shopping - Thousands of Stores. Millions of Products.
> http://shopping.yahoo.com/
>
> _________________________________
> FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
>
--
www.tasmail.com
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
