Hi there I had that a while back . Check if the 3Com puts the right route(leased line) back into the routing table after the backup dial gets terminated . We had such a problem so you might want to do some floating static routes to get all back to normal . Good luck ! Cheers Olden -----Original Message----- From: Tommy Lee [mailto:[EMAIL PROTECTED]] Sent: Friday, November 24, 2000 9:13 AM To: [EMAIL PROTECTED] Subject: Hello Have anybody integrated 3Com with CIsco on Dial Backup. I have integrated 3Com Router NetBuilder's Office Connect with Cisco 3661 over dedicated link and it is working fine. Now I am facing some problem on Dial Backup from Cisco to 3Com or otherwise. Any suggestions? Thanks in advance. T.Lee __________________________________________________ Do You Yahoo!? Yahoo! Shopping - Thousands of Stores. Millions of Products. http://shopping.yahoo.com/ _________________________________ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _________________________________ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]