it sounds like you have either a misconfiged (username/password) or
missconfiged auth ...try changing your config line to "ppp auth chap pap"
see what happens
steve
>From: "cslx" <[EMAIL PROTECTED]>
>Reply-To: "cslx" <[EMAIL PROTECTED]>
>To: [EMAIL PROTECTED]
>Subject: the problem about dialing in the remote network/cisco2620
>Date: Fri, 24 Nov 2000 18:38:42 +0800
>
>I can't dial in the remote network,when it is saying "it is checking
>username and password",the system tells me that the remote network doesnot
>have response for it,why?
>i use debug ppp auth,debug modem and debug ppp nego,the result is :
>05:15:20: tty1: Modem: IDLE->READY
>05:15:22: %LINK-3-UPDOWN: Interface Serial0/0, changed state to up
>05:15:22: Se0/0 PPP: Treating connection as a dedicated line
>05:15:22: Se0/0 PPP: Phase is ESTABLISHING, Active Open
>05:15:22: Se0/0 LCP: O CONFREQ [Closed] id 30 len 24
>05:15:22: Se0/0 LCP: ACCM 0x000A0000 (0x0206000A0000)
>05:15:22: Se0/0 LCP: AuthProto PAP (0x0304C023)
>05:15:22: Se0/0 LCP: MagicNumber 0xB1850FE1 (0x0506B1850FE1)
>05:15:22: Se0/0 LCP: PFC (0x0702)
>05:15:22: Se0/0 LCP: ACFC (0x0802)
>05:15:23: TTY36: autoconfigure probe started
>05:15:23: TTY38: autoconfigure probe started
>05:15:23: TTY39: autoconfigure probe started
>05:15:23: TTY40: autoconfigure probe started
>05:15:23: TTY35: autoconfigure probe started
>05:15:24: Se0/0 LCP: TIMEout: State REQsent
>05:15:24: Se0/0 LCP: O CONFREQ [REQsent] id 31 len 24
>05:15:24: Se0/0 LCP: ACCM 0x000A0000 (0x0206000A0000)
>05:15:24: Se0/0 LCP: AuthProto PAP (0x0304C023)
>05:15:24: Se0/0 LCP: MagicNumber 0xB1850FE1 (0x0506B1850FE1)
>05:15:24: Se0/0 LCP: PFC (0x0702)
>05:15:24: Se0/0 LCP: ACFC (0x0802)
>05:15:26: Se0/0 LCP: TIMEout: State REQsent
>05:15:26: Se0/0 LCP: O CONFREQ [REQsent] id 32 len 24
>05:15:26: Se0/0 LCP: ACCM 0x000A0000 (0x0206000A0000)
>05:15:26: Se0/0 LCP: AuthProto PAP (0x0304C023)
>05:15:26: Se0/0 LCP: MagicNumber 0xB1850FE1 (0x0506B1850FE1)
>05:15:26: Se0/0 LCP: PFC (0x0702)
>05:15:26: Se0/0 LCP: ACFC (0x0802)
>05:15:28: Se0/0 LCP: TIMEout: State REQsent
>05:15:28: Se0/0 LCP: O CONFREQ [REQsent] id 33 len 24
>05:15:28: Se0/0 LCP: ACCM 0x000A0000 (0x0206000A0000)
>05:15:28: Se0/0 LCP: AuthProto PAP (0x0304C023)
>05:15:28: Se0/0 LCP: MagicNumber 0xB1850FE1 (0x0506B1850FE1)
>05:15:28: Se0/0 LCP: PFC (0x0702)
>05:15:28: Se0/0 LCP: ACFC (0x0802)
>05:15:30: Se0/0 LCP: TIMEout: State REQsent
>05:15:30: Se0/0 LCP: O CONFREQ [REQsent] id 34 len 24
>05:15:30: Se0/0 LCP: ACCM 0x000A0000 (0x0206000A0000)
>05:15:30: Se0/0 LCP: AuthProto PAP (0x0304C023)
>05:15:30: Se0/0 LCP: MagicNumber 0xB1850FE1 (0x0506B1850FE1)
>05:15:30: Se0/0 LCP: PFC (0x0702)
>05:15:30: Se0/0 LCP: ACFC (0x0802)
>05:15:32: Se0/0 LCP: TIMEout: State REQsent
>05:15:32: Se0/0 LCP: O CONFREQ [REQsent] id 35 len 24
>05:15:32: Se0/0 LCP: ACCM 0x000A0000 (0x0206000A0000)
>05:15:32: Se0/0 LCP: AuthProto PAP (0x0304C023)
>05:15:32: Se0/0 LCP: MagicNumber 0xB1850FE1 (0x0506B1850FE1)
>05:15:32: Se0/0 LCP: PFC (0x0702)
>05:15:32: Se0/0 LCP: ACFC (0x0802)
>05:15:34: Se0/0 LCP: TIMEout: State REQsent
>05:15:34: Se0/0 LCP: O CONFREQ [REQsent] id 36 len 24
>05:15:34: Se0/0 LCP: ACCM 0x000A0000 (0x0206000A0000)
>05:15:34: Se0/0 LCP: AuthProto PAP (0x0304C023)
>05:15:34: Se0/0 LCP: MagicNumber 0xB1850FE1 (0x0506B1850FE1)
>05:15:34: Se0/0 LCP: PFC (0x0702)
>05:15:34: Se0/0 LCP: ACFC (0x0802)
>05:15:36: Se0/0 LCP: TIMEout: State REQsent
>05:15:36: Se0/0 LCP: O CONFREQ [REQsent] id 37 len 24
>05:15:36: Se0/0 LCP: ACCM 0x000A0000 (0x0206000A0000)
>05:15:36: Se0/0 LCP: AuthProto PAP (0x0304C023)
>05:15:36: Se0/0 LCP: MagicNumber 0xB1850FE1 (0x0506B1850FE1)
>05:15:36: Se0/0 LCP: PFC (0x0702)
>05:15:36: Se0/0 LCP: ACFC (0x0802)
>05:15:38: Se0/0 LCP: TIMEout: State REQsent
>05:15:38: Se0/0 LCP: O CONFREQ [REQsent] id 38 len 24
>05:15:38: Se0/0 LCP: ACCM 0x000A0000 (0x0206000A0000)
>05:15:38: Se0/0 LCP: AuthProto PAP (0x0304C023)
>05:15:38: Se0/0 LCP: MagicNumber 0xB1850FE1 (0x0506B1850FE1)
>05:15:38: Se0/0 LCP: PFC (0x0702)
>05:15:38: Se0/0 LCP: ACFC (0x0802)
>05:15:40: Se0/0 LCP: TIMEout: State REQsent
>05:15:40: Se0/0 LCP: O CONFREQ [REQsent] id 39 len 24
>05:15:40: Se0/0 LCP: ACCM 0x000A0000 (0x0206000A0000)
>05:15:40: Se0/0 LCP: AuthProto PAP (0x0304C023)
>05:15:40: Se0/0 LCP: MagicNumber 0xB1850FE1 (0x0506B1850FE1)
>05:15:40: Se0/0 LCP: PFC (0x0702)
>05:15:40: Se0/0 LCP: ACFC (0x0802)
>05:15:42: Se0/0 LCP: TIMEout: State REQsent
>05:15:42: Se0/0 LCP: O CONFREQ [REQsent] id 40 len 24
>05:15:42: Se0/0 LCP: ACCM 0x000A0000 (0x0206000A0000)
>05:15:42: Se0/0 LCP: AuthProto PAP (0x0304C023)
>05:15:42: Se0/0 LCP: MagicNumber 0xB1850FE1 (0x0506B1850FE1)
>05:15:42: Se0/0 LCP: PFC (0x0702)
>05:15:42: Se0/0 LCP: ACFC (0x0802)
>05:15:42: TTY37: autoconfigure probe started
>05:15:44: Se0/0 LCP: TIMEout: State REQsent
>05:15:44: TTY1: Async Int reset: Dropping DTR
>05:15:44: Se0/0 LCP: State is Listen
>05:15:45: TTY1: DSR was dropped
>05:15:45: tty1: Modem: READY->HANGUP
>05:15:46: %LINK-5-CHANGED: Interface Serial0/0, changed state to reset
>05:15:46: Se0/0 LCP: State is Closed
>05:15:46: Se0/0 PPP: Phase is DOWN
>05:15:46: Se0/0 IPCP: Remove route to 10.179.224.2
>05:15:46: TTY1: dropping DTR, hanging up
>05:15:46: tty1: Modem: HANGUP->IDLE
>05:15:47: TTY1: cleanup pending. Delaying DTR
>05:15:48: TTY1: cleanup pending. Delaying DTR
>05:15:49: TTY1: destroy timer type 0
>05:15:49: TTY1: destroy timer type 1
>05:15:49: TTY1: destroy timer type 3
>05:15:49: TTY1: destroy timer type 4
>05:15:49: TTY1: destroy timer type 2
>05:15:49: Serial0/0: allowing modem_process to continue hangup
>05:15:49: TTY36: autoconfigure probe started
>05:15:49: TTY39: autoconfigure probe started
>05:15:49: TTY38: autoconfigure probe started
>05:15:49: TTY40: autoconfigure probe started
>05:15:49: TTY35: autoconfigure probe started
>05:15:50: TTY1: restoring DTR
>05:15:50: TTY1: autoconfigure probe started
>05:15:51: %LINK-3-UPDOWN: Interface Serial0/0, changed state to down
>05:15:51: Se0/0 LCP: State is Closed
>05:15:51: Se0/0 PPP: Phase is DOWN
>
>
>could you tell me the reason?
>thanx
>
>
>_________________________________
>FAQ, list archives, and subscription info:
>http://www.groupstudy.com/list/cisco.html
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_____________________________________________________________________________________
Get more from the Web. FREE MSN Explorer download : http://explorer.msn.com
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
