-----Original Message-----
From: Jason Roysdon <[EMAIL PROTECTED]>
Newsgroups: groupstudy.cisco
To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
Date: Wednesday, November 29, 2000 8:30 AM
Subject: Re: Making a router load a different config
Sure, copy tftp startup-config (which doesn't affect your running conifg).
Then next time it comes up, it uses the new startup config.
--
Jason Roysdon, CCNA, MCSE, CNA, Network+, A+
List email: [EMAIL PROTECTED]
Homepage: http://jason.artoo.net/
Cisco resources: http://r2cisco.artoo.net/
""John Zaggat"" <[EMAIL PROTECTED]> wrote in message
901nr6$73i$[EMAIL PROTECTED]">news:901nr6$73i$[EMAIL PROTECTED]...
> Hi,
> We are physically moving a router from one location to another, I will be
> connecting remotely to this router, is it possible to set a router to load
> the new config (saved in the flash) at next power up.
> Thanks
> Shawn
>
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
-------------------------------------------------------------------------
This email server is running an evaluation copy of the MailShield anti-
spam software. Please contact your email administrator if you have any
questions about this message. MailShield product info: www.mailshield.com
-------------------------------------------------------------------------
This email server is running an evaluation copy of the MailShield anti-
spam software. Please contact your email administrator if you have any
questions about this message. MailShield product info: www.mailshield.com
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
