I had the same problem with a 1600. Did you recently upgrade the flash.
If so that may be the problem.
I loaded an image with ip/ipx/at/appn and the image was to big for for the
amount of ram I had, I had 12mb and the image needs 16. There was not enough
memory for the console. I could telnet in and the router still routed. This
was a case that was resolved by cisco officially and that was their story.
Funny aint it that the flash will hold the image but the memory wont support
it.
Duck
----- Original Message -----
From: Barbara Cobbina <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, November 29, 2000 7:13 AM
Subject: garbage in hperterminal ?
> Can anyone please tell me why I get garbage in
> hyperterminal when I try to access my 2503 from the
> console.
>
> My settings are 9600-8-N-2 and I think I have the
> right cable as it worked before.
>
> Cheers
> Babs
>
> __________________________________________________
> Do You Yahoo!?
> Yahoo! Shopping - Thousands of Stores. Millions of Products.
> http://shopping.yahoo.com/
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
