Hello, I'm having a problem using PIX PAT. Here is my config: PIX Version 5.2(3) ip address outside 24.176.234.252 255.255.255.0 ip address inside 172.16.1.1 255.255.255.0 global (outside) 1 interface nat (inside) 1 0.0.0.0 0.0.0.0 0 0 conduit permit icmp any any route outside 0.0.0.0 0.0.0.0 24.176.234.1 1 The problem is it works fine for a while, then connection is lost. It will work again if I ping inside interface and then ping outside gateway. I'm wondering if there is a default timeout setting that I can modify? Thanks in advance. Jim __________________________________________________ Do You Yahoo!? Yahoo! Shopping - Thousands of Stores. Millions of Products. http://shopping.yahoo.com/ _________________________________ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
